Skip to content
Established 1975 A Trusted Brand
Made In Britain Homegrown Company
Safe & Secure Feel Confident as You Shop
Established 1975 A Trusted Brand
Made In Britain Homegrown Company
Safe & Secure Feel Confident as You Shop

Blumat Automatic Pot Plant Waterers

These Blumat Automatic Pot Plant Waterers dispense precisely the right amount of water which pot plants require, irrespective of whether they are in a sunny or shady location.  The water is sucked in along a thin tube from your choice of water container (not included) and released to the plant through the clay cone.  This system works efficiently, neither under nor over watering your plants, water is gradually released from the cone as the soil it is in becomes drier, in this way your plants are only provided with water as and when they need it.  It's also really easy to set up - push the water soaked cone into the plant pot and put the suction pipe into the water container - it's that quick and easy!

For pots up to 6 inches (15cm) in diameter one Waterer will be sufficient. For larger pots or containers place a probe every 6-8 inches (15-20cm) apart.

SPECIAL OFFER AVAILABLE - select the pack of nine and you will make a saving against purchasing three packs of three. 
SKU BAPPW01
  • PayPal
Benefits:

Ready to use at any time
- it should take between 20-30 minutes to set up.

Pot plants can remain in their usual location - each waterer has a 31 inch (80cm) suction tube connected to it, so your water container can be placed up to 31 inches (80cm) from the plant being watered.

No repotting required - simply push the cone of the waterer into the soil surrounding your plant. Each waterer is able to keep a 6 inch (15cm) pot well watered.

Ideal watering system when you are away on holiday - this automatic watering system means only the water container needs topping up with water and all the pot plants which have their suction tube in the water will remain well watered. The amount of waterers which can be run from one water container is not limited - just remember the more waterers connected to the water container the faster it will empty, so use a larger container when watering lots of plants.  Can be used throughout the whole year.
Learn more
Operating Instructions

Easy And Simple To Set Up . . . 
Remove the green cap from the Waterer and place the clay cone in a bowl of water for approximately 15 minutes. Then fill the Waterer with water up to the brim and press the green cap firmly back in place.


Insert the whole of the clay cone into the soil surrounding the plant to be watered. For pots up to 6 inches (15cm) in diameter one Waterer will be sufficient. For larger pots or containers place a probe every 6-8 inches (15-20cm) apart.


Immerse the suction pipe right down to the bottom of your chosen water container.


To work efficiently the green cap of the Waterer must be positioned so that it is above the water level in the water container. Raising or lowering the height of the water container raises or lowers the amount of water released.

Click here to see operating instructions for this watering system.