Elite Greenhouse Spares

Use approx. 4 clips - 2 either side - on a 24 inch (61cm) square pane of glass. Dimensions: 2¾ inches (7cm) wide x 1 inch (2cm) deep. Sold in pack...

Manufactured from stainless steel these long lasting clips won't rust or rot. Use four clips per 24 inch (61cm) long pane of glass, polypropylene o...

3/8 inch (10mm) wide head.Sold in packs of 10 or 50.

Manufactured from aluminium.Fixed size - will give a 3/8" (10mm) overlap.Use a minimum of two clips per 24" (61cm) wide pane of glass.Supplied in p...

Manufactured from white nylon with steel bearings.Supplied complete with aluminium bolts and nuts. Available in two sizes: 28mm external diameter...

Manufactured from aluminium. Part formed to enable the clip to be adjusted to suit the depth of overlap. Approx. dimensions: 3/8 inch (10mm) wide &...

A black 8mm wide x 5mm thick high density foam glazing Strip with sticky back for ease of application.Apply the sticky side of the strip to the fra...

Matt black PVC pipes & fittings with UV protection.Lean-to Rainwater Kit - this kit includes all the parts required to divert water into one wa...

Can be retro fitted to any Elite Free Standing Greenhouse. Construction - Made from strong, rust proof cast aluminium. Finish - Available in Plai...

This roof window is approximately 2ft square and includes a roof stay to enable you to latch the window closed or leave it open.You can manually op...

The rubber fin on the edge of the Bar Capping also adds a better water seal between the frame and glass. The capping is simply placed into position...

This aluminium base can be used to site your lean to straight onto any type of solid foundation (such as concrete or paving slabs), or directly ont...

All the components supplied to fit a five bladed louvre to your Elite greenhouse. Select the glazing for the blades to suit your greenhouse, toughe...

The Capping is simply placed into position and then stainless steel self tapping screws are used to hold the capping to the aluminium glazing bar. ...

PVC bar capping is only suitable for greenhouses glazed with either toughened glass or polycarbonate. Available in colours to match your Easy Grow ...

A ‘dropped door’ is suppllied as standard with the Elite Compact, Streamline, Craftsman, High Eave and Belmont. If you are ordering an aluminium b...

The rubber fin on the edge of the Bar Capping also adds a better water seal between the frame and glass. The capping is simply placed into position...

Easy to attach it simply locates into place along the aluminium glazing bar of the greenhouse and is held in place with stainless steel screws. The...

An Elite Windsor Lean-To requires a base of some type - aluminium, timber or brick - to allow the door to slide in the overhanging bottom track. Th...

The rubber fin on the edge of the Bar Capping also adds a better water seal between the frame and glass. The capping is simply placed into position...

The rubber fin on the edge of the Bar Capping also adds a better water seal between the frame and glass. The capping is simply placed into position...

The rubber fin on the edge of the Bar Capping also adds a better water seal between the frame and glass. The capping is simply placed into position...