Greenhouse Spares & Accessories

Use approx. 4 clips - 2 either side - on a 24 inch (61cm) square pane of glass. Dimensions: 2¾ inches (7cm) wide x 1 inch (2cm) deep. Sold in pack...

Manufactured from stainless steel these long lasting clips won't rust or rot. Use four clips per 24 inch (61cm) long pane of glass, polypropylene o...

3/8 inch (10mm) wide head.Sold in packs of 10 or 50.

Manufactured from aluminium.Fixed size - will give a 3/8" (10mm) overlap.Use a minimum of two clips per 24" (61cm) wide pane of glass.Supplied in p...

Manufactured from white nylon with steel bearings.Supplied complete with aluminium bolts and nuts. Available in two sizes: 28mm external diameter...

Manufactured from aluminium. Part formed to enable the clip to be adjusted to suit the depth of overlap. Approx. dimensions: 3/8 inch (10mm) wide &...

A black 8mm wide x 5mm thick high density foam glazing Strip with sticky back for ease of application.Apply the sticky side of the strip to the fra...

Made from hardwearing, moulded plastic, each kit includes a 1 inch (2.5cm) diameter downpipe, end cap and fittings.  This kit slots easily and neat...

Heavy Duty Cover - specifically designed to fit the Gardman / Grow It Polytunnel, it is made from robust reinforced UV treated PE for a long life....

Made from long lasting aluminium.Can be removed and reused as required. Supplied in packs of ten.

Fully Automatic - Opens your roof vent as the temperature rises maximising ventilation and air circulation. Fully Adjustable - Has an adjustable ...

3 inches (7.5cm) diameter half round gutter. Supplied complete with all fixing brackets. Order one kit per side of greenhouse. Select the same leng...

Polycarbonate is a double-skinned material with an air gap between for effective insulation, helping to keep things warm in winter and cool in summ...

Pins should be fixed in place using the Pin Tool available separately. If removing the pins, use a Pin Tool to lever the pin out. Locking Pins ar...

PLEASE NOTE: all the guttering parts are now in BLACK - the green is not available at this time. Half round bracket - 70mm across and 50mm at the ...

Designed to replace an existing polycarbonate panel in a Rion greenhouse, this kit consists of the side components for a seven bladed louvre togeth...

Easy to fit - Designed specifically to fit the Palram Canopia Louvre Window. Automated - Automatically opens the louvre window, it also has a rel...

Easy to secure to either a soft or concrete ground. Soft ground - pegs (not supplied) can be pushed through the holes in the base to secure. Concre...

PLEASE NOTE: all the guttering parts are now in BLACK - the green is not available at this time. Width 3Ľ" / 82mm Rion part code: G5. Learn...

Engineered to provide stability and 12cm additional headroom.  Made from heavy-duty 100% UV-protected resin and engineered with a U-shape design fo...

This louvre can be fitted into any side of the greenhouse, including the back of the greenhouse opposite the door. However, it can not be fitted in...

Prefabricated galvanised steel - available plain or with a green powder coated finish to suit the finish on your greenhouse frame. Available in se...

Designed by Canopia to improve anchorage of your greenhouse for extreme weather conditions – withstands winds up to 100 kph. It is suitable for use...