Gardena Drip & Spray Kits & Components

Drippers are used to provide a regular, measured 'drip' of water at the base of the plant.  The flow rate of the Drippers is set at 4 litres per ho...

Simply turning the control switch on the top of the value will stop water flowing beyond the valve. Design includes stainless steel clips enabling ...

You can easily adjust the irrigation diameter between 4 inches-16 inches (10-40cm) to suit the area you wish to water. Nozzles have a flow rate of ...

Provide a regular, measured 'drip' of water at the base of the plant.The flow rate of the Drippers is set at 2 litres per hour. They are ideal for ...

Designed to enable quick and easy connection or disconnection of branch tube, so if your watering needs increase within the garden or greenhouse ex...

The flow rate of the Nozzles is set at 45 litres per hour. Provides a light spray over a 90º area between approx. 6ft 6 inches (2m) up to 9ft 10 in...

Provide a regular, measured 'drip' of water at the base of the plant.Ideal for use in hanging baskets or containers as well as being suitable for u...

The flow rate of the Sprinklers is set at 85 litres per hour. Provides a fine spray over a circular area of between approx. 5ft (1.5m) up to 11ft 6...

When using these connectors to attach 3/16 inch (4.6mm) branch tube into the side wall of ½ inch (13mm) supply tube, use an installation tool (avai...

Size : 9mm inside diameter, with an outside diameter of 15mm. Contents : 5 x 9mm O rings.Learn moreClick Here to download Gardena's useful free wa...

The irrigation diameter can be easily adjusted between 4 inches-16 inches (10-40cm) to suit the area you wish to water.Nozzles have a flow rate of ...

Discreet clamps fit snugly around the 3/16 inch (4.6mm) Branch Tube.  Pre-formed holes in the Clamps enable you to use screws (not supplied) to anc...

The design of the joints enables them to: Be securely held in place on either soft ground or a hard surface by combining them with 3/16 inch (4.6mm...

Lets you run between 2 to 6 separate watering systems.  Each time the water flow is stopped / started the Distributor switches the water supply to ...

The flow rate of the Nozzles is set at 35 litres per hour.Providing a fine spray, the nozzle can be adjusted to cover either a: 90º area up to 8ft ...

Simple barbed fitting Overall length 2Ľ" (6cm).Learn more The Tropf Blumat Drip Watering System. Controlled, Automatic Drip Watering.

Each 'clamp' is supplied as a flat piece of aluminium measuring 4 inches (10cm). The aluminium is flexible enough to allow you to bend the 'clamp' ...

The input end of the Master Unit has a coupling enabling it to simply accept a Snap-On hose connector which is on the end of hosepipe, attached to ...

This Drip Starter Set includes: Standard Master Unit – this is designed to filter and reduce your mains water pressure to 21 psi, the ideal pressur...