Skip to content
Tropf Blumat Mains Kit - Fitting to 19mm Threaded Tap

Tropf Blumat Mains Kit - Fitting to 19mm Threaded Tap

This Tropf Blumat Mains Kit Tap contains sufficient components to water 12 hanging baskets, or 12 tubs, or 4 grow bags or a 10ft x 8" (3m x 20cm) bed etc.
This automatic watering kit is designed to be fitted to a standard 3/4" threaded, outside tap.

SPECIAL OFFER AVAILABLE - Buy this set and you will SAVE £10.37 on purchasing the components separately.

£87.00
SKU TBMKT
Contents:

Pressure Reducer - to fit a ľ" screw threaded mains water tap.

12 Ceramic Probes - these regulate the flow of water at the point of watering.

11 In-Line Connectors - to connect the drip tube to the feed tube (1 is required for each probe).

1 End-Line Connector - to connect the last piece of drip tube and probe into the system.

10 Metres Ľ" Feed Tube - this forms the main artery of the system, carrying the water around.

3 Metres 1/16" Drip Tube - carries water from the Feed Tube up to and through a probe and delivers the drips.

Operating Instructions
Click here to see instructions for operating this Tropf Blumat system.