Water Butt - approximately 4ft / 121cm high, 1ft 8in / 50cm wide, 1ft 9¼ inches / 54cm long. . Stand – approximately 15 inches / 38.5cm wide, 12 inches (30cm) high.
Capacity 250 litres (55 gallons).
Manufactured from 100% recycled plastic which is UV stabilised and weather resistant for a long life. Please note - if temperatures fall below freezing you should drain the water butt.
Safe lockable lid allows you to dunk your watering can if you don't want to fill it using the tap.
Supplied complete with tap which fits securely into the pre drilled point near the base of the water butt.
Optional Stand and Divertor
Stand - securely lifts the water butt off the ground by 12 inches / 30cm, placing the tap in the perfect position for filling a bucket or watering can.
Divertor - this enables you to connect the water butt to a plastic downpipe. It will fit 68mm round or 65mm square plastic downpipes (which covers the majority of domestically used downpipes).
It is not suitable for cast iron downpipes. This diverter includes a 20 inches / 50cm flexible hose to carry the water from the downpipe to the water butt. Once fitted, when the water butt is full, the excess water will go down the downpipe rather than flooding the water butt.
Despatched direct from the manufacturers please allow 7-10 days for delivery.