Skip to content
The robust Tank Connector is simply to install. Unscrew the Tank Connector so that you have three separate parts ready to fit:

A: - a 2" (5cm) long screwed fitting, which should be fitted through the side or base of a tank, after having drilled an 11mm hole (you will need access to the inside of the tank in order to fit this).

B - a rubber washer to fit onto the outside of the tank.

C - a screw fitting to lock the Tank Connector of the water tank, screw tight up to the washer for a secure, watertight connection.

You are then ready to fit the Ľ" tubing to the barbed fitting at the end of the Tank Connector.