Skip to content

Standard Slim Water Butt 100 litre with stand and diverter

Despatched direct from the manufacturers please allow 7-10 days for delivery.

This space saving Slim Water Butt is a square shape making it perfect to fit into tight corners or against a wall. Its slim design makes it ideal when space if limited but you still want to collect and store rainwater.
 
This complete kit includes a strong stand to hold the water butt off the ground, a tap which allows easy filling of watering cans and buckets, a simple rain diverter to enable you to connect a house downpipe to the water butt so efficiently collecting rainwater from your house roof. It features a child safe lid which can be removed to allow you to dunk your watering can if required. 
£79.99
SKU GUSSGWB100K
Dimensions :
Water Butt - approximately 3ft / 91cm high, 1ft 3¾in / 40cm wide,  1ft 3¾in / 40cm long. 
Stand – approximately 10½in (27cm) high. 
Capacity 100 litres (22 gallons).

Manufactured from 100% recycled plastic which is UV stabilised and weather resistant for a long life. Please note - if temperatures fall below freezing you should drain the water butt.

Safe lockable lid allows you to dunk your watering can if you don't want to fill it using the tap.

Supplied complete with tap which fits securely into the pre drilled point near the base of the water butt.

Diverter included this enables you to connect the water butt to a plastic downpipe. It will fit 68mm round or 65mm square plastic downpipes (which covers the majority of domestically used downpipes). It is not suitable for cast iron downpipes. This diverter includes a 18½in / 47cm x 1¼in / 20mm diameter flexible hose to carry the water from the downpipe to the water butt. Once fitted, when the water butt is full, the excess water will go down the downpipe rather than flooding the water butt.

Water Butt Stand securely lifts the water butt off the ground by 10½in / 27cm, making it easier to fill a bucket or watering can.