
Digital Day & Night Thermostat with Timer
This dual mode thermostat can also be used to control cooling fans as it can be switched between 'heat mode' or 'cooling mode'.
NB. Maximum total loading of this thermostat must not exceed 600 watts.
Continual readout of current temperature and time.
On / off temperature cycle adjustable between 0.1°c and 5°c.
Temperature set at midway point.
Coloured Icon flashes to indicate function presently in use.
Separate timed circuit to turn separate heaters, lighting, fans or spray systems on twice and off twice in 24 hour period.
A waterproof, 3 metre long, low voltage sensor.
Adjustable alarm function to give visual and audible warning when temperature goes above or below set temperature parameters.
Alarm can be disabled if not required.
Both upper and lower temperature limits can be set.
Comes with preset parameters, so can just be plugged in and used if required.
Can be used in heat mode or cool mode to control heaters or fans.
Will not lose memory settings if power is disconnected.
Measures to wthin 0.1°c.
Easy to set and use.
Maximum 600 watts.
NB.This thermostat has no IP rating so care must be taken when used in the vicinity of water or in areas with high humidity, ideally this unit should be placed in a suitable waterproof enclosure when used in such environments.
12 months guarantee.