Gardena Micro Drip and Spray Systems

High quality, UV stabilised ½ inch (13mm) strong black tubing. Can be used above and below ground (buried in soil or compost or covered with mulch)...

Simply clip the tube into the top of the peg & sink the 4¼ inch (11cm) 'leg' of the peg into the ground.  Using these clips enables you to form...

High quality, UV stabilised 3/16 inch (4.6mm) unobtrusive black tubing.  Use when creating a mains drip and spray watering system to take the water...

Designed to enable quick and easy connection or disconnection to supply tube and branch tube, so if your watering needs increase within the garden ...

Designed to enable quick and easy connection or disconnection of supply tube, so if your watering needs increase within the garden or greenhouse ex...

The input end of the unit has a coupling enabling it to simply accept a Snap-On hose connector which is on the end of hosepipe, attached to your ma...

Contents: Flex Water Computer - (Gardena code - 1890-28) - with electronic display and watering durations from 2 to 60 minutes, once, twice or thr...

Drippers are used to provide a regular, measured 'drip' of water at the base of the plant.Adjustable flow rate of between 0-20 litres per hour just...

Designed to enable quick and easy connection or disconnection of supply tube, so if your watering needs increase within the garden or greenhouse ex...

Designed for quick and easy connection or disconnection to supply tube, so if your watering needs increase within the garden or greenhouse extendin...

The flow rate of the Nozzles is set at 120 litres per hour. Provides a light spray over a 360º area between approx. 6ft 6 inches (2m) up to 9ft 10 ...

Use to: Make suitable holes in supply tube for direct insertion of drippers and micro jets. To 'screw' these into position in the holes or end of ...

Securely seal unwanted holes in supply tubing if you modify your watering system. Securely seal the end of a run of 3/16 inch tubing. Gardena produ...

The flow rate of the Nozzles is set at 95 litres per hour. Provides a light spray over a 180 degree area between approx. 6ft 6 inches (2m) up to 8f...

Simply fit the 3/16 inch (4.6mm) Branch tube on either side of the dripper.Provide a regular, measured 'drip' of water at the base of the plant. Id...

Designed for quick and easy connection or disconnection of branch tube, so if your watering needs increase within the garden or greenhouse extendin...

The design of these extensions enables them to be either:  Inserted directly into the wall of ½ inch (13mm) Supply Tube. Or for a more secure conne...

Designed to enable quick and easy connection or disconnection to supply tube, so if your watering needs increase within the garden or greenhouse ex...

Simply fit the tube on either side of the dripper.These drippers are used to provide a regular, measured 'drip' of water at the base of the plant.I...

Especially useful if you're planning a large watering system in a garden or greenhouse.Design includes stainless steel clips enabling quick and eas...

The versatile design of the joints enables them to: Be securely held in place on either soft ground or a hard surface - by combining them with eith...

Fit directly into the wall of ½ inch (13mm) Supply Tube, into Spray Nozzle Joints, Tube and Nozzle Pegs or Pipe Extensions (all available to purcha...

The flow rate of the Mist Nozzles is set at 15 litres per hour.  Provides a fine mist over a 360º area up to approx. 1ft 8 inches (0.5m). To contro...

Can be used to hold the Supply Tube in place on the ground - the 5 inch (13cm) 'leg' on the base of the unit can be sunk into the ground to securel...