YOUR Basket
Items: 0
Goods Total: £0.00
Delivery: £0.00
Contact us on:
01246 451077

Hose Connectors & Fittings

Having collected rainwater in a water butt or tank, you are then faced with the dilemma as to how to get the stored rainwater to your plants. The most obvious way of transferring the water is to use the tap to decant rainwater into a Watering Can. However, if you are watering large areas or over large distances, this may not be the most efficient method. For larger areas you could set up an irrigation system using the water butt with its stored rainwater as the source of water to run the system. When you've chosen the type of system you wish to set up - be it an Iriso Drip Watering System, a Tropf Blumat System, a Water butt Drip System etc. - you will need to transfer the water from the tank to the point at which you wish to start watering. The simplest way to do this is to push a ó" / 13mm hose onto the barbed tap on the water butt - as the water is at low pressure simply pushing the hose onto the tap will be secure enough. Once you have connected the hosepipe then you can now start to use standard hose connectors and couplings to get the hosepipe to where it needs to carry the water.

Gardena Threaded Tap Connector
Screw this Gardena Threaded Tap Connector to an outside tap to provide a secure connection point for a push fit (snap on) connector enabling quick, easy attachment of a garden hose.

Gardena Threaded Twin Tap Connector
Easy to fit to a threaded tap this Gardena Twin Outlet Threaded Tap Connector enables you to connect to two garden hosepipes, water controllers etc. from one tap.

Gardena Threaded Four Tap Connector
Designed to simply screw onto a threaded tap this Gardena Four Outlet Threaded Tap Connector enables you to easily operate up to a maximum of four watering accessories simultaneously or individually from just one tap.

Claber Twin Tap Connector
Increase the potential of your outside tap by adding this Double Tap Connector. Simply screwing onto the outside tap, it has two branches with taps enabling you to run two different watering systems from the same tap.

Claber Quick Clip Tap Connector
Quick and easy to fit to any square and mixer taps, this Tap Connector provides a perfectly watertight connection. The fitting at the base of the connector is ready to accept any make of Snap-On hose connector.

Gardena 13mm Snap On Hose Connector
Use Gardena's Snap-On Hose Connector to quickly and easily form a secure push fit connection between ½" (13mm) garden hose and a tap connector, hose coupling or watering appliance.

Gardena 13mm Water Stop Snap On Hose Connector
Gardena's Water Stop ½" (13mm) Snap-On Supergrip Hose Connector has been designed to enable you to quickly & easily change over the watering appliance on the end of your garden hose without needing to switch off the water supply.
When disconnected an internal valve stops the water flowing, when reconnected water flows again.

Gardena Premium Metal Hose Connector
For a top quality, secure hose connector this Premium Hose Connector from Gardena is hard to beat!
Its robust design ensures a strong reliable connection to your appliance but allows a quick and easy release by a simple pull action mechanism.

Gardena Hose to Hose Extension Joint
Gardena's Hose to Hose Extension Joint enables you to securely join two lengths of garden hose when used with push fit hose connectors.

Gardena Three Way Hose Coupling
To securely branch your garden hosepipe in two different directions insert this Gardena Three Way Hose Coupling.

Gardena Accessory Adaptor
This sturdy plastic Gardena connector is used to adapt sprinklers or any other accessory with a 3/4" threaded female connection, enabling you then to use them with Snap-On Hose Connectors.

Gardena 19mm Snap On Hose Connector
Form a secure push fit connection to any threaded tap connector, hose coupling or watering appliance with this Gardena ¾" (19mm) Snap-On Hose Connector which easily fits to ¾" (19mm) garden hose or piping.

13mm to 6mm Tube Reducer
When the source of water for an automatic ¼" (6mm) drip watering system is a long distance from the plants this ½" (13mm) to ¼" (6mm) Adaptor enables you reach to reach the area to be watered using ½" (13mm) hose then reduced down to ¼" (6mm) tubing with ease.

Gardena Master Unit
When installing a Gardena Drip & Spray System a Master Unit should be fitted at the start of the system to filter & reduce the mains water pressure to 21psi (1.5 bar) which efficiently operates the micro-jets, sprinklers and drippers.

Tube Reducer For 19mm Down To 13mm Pipe
This sturdy barbed Tube Reducer fitting is designed to take ¾" pipe on one side and ½" pipe on the other.

In Line 13mm Filter
Designed for use with the Water Butt Drip System, this ½" In Line Filter can be connected into any ½" pipe where you want to filter debris from water (for example filtering rain water from a water butt).

Weeping Hose 13mm Straight Connector
Use this robust, barbed, black plastic ½" Straight Connector to join two pieces of ½" Weeping Garden Hose.

Weeping Hose 13mm Elbow Connector
Use this sturdy, black plastic Elbow Connector to create an efficient right angled joint when creating a layout with the ½" Weeping Garden Hose.

Weeping Hose 13mm Tee Connector
When creating a layout with the Weeping Garden Hose, this ½" T Connector can be used to 'branch' the Hose.

13mm End Plug For Weeping Hose
A ½" Plug designed to end a length of Weeping Garden Hose.

Darlac Super Pro Multi-Pattern Spray Gun
A quality brass and alloy, Darlac Multi-Pattern Spray Gun allows nine different settings from a gentle mist for the most delicate of seedlings to a strong jet ideal for cleaning paths or the car.

Gardena 5303 Accessory O Ring
Gardena 5303-20 accessory O rings.
This pack of spare O rings fit all the Gardena System connecting nipples, E.G. click-on accessories, nozzles, sprayers and sprinklers.

Claber 19mm Snap On Hose Connector
Claber's 19mm Snap-On Hose Connector is designed to enable you to quickly and easily create a secure push fit connection between ¾" (19mm) hosepipe and a tap connector, hose coupling or watering appliance.
Brass Three Way Connector
This Brass Three Way Connector makes it simple for you to securely branch your garden hose in two different directions. For quick, drip free connections this fitting is designed to work with snap-on hose connectors / push fit connectors, whether these are made from brass or plastic.
Brass Hose Connector
This Brass Hose Connector is designed to be fitted to the end of a ½" (13mm) hosepipe to create a secure push fit connection to take a tap connector, hose coupling or watering appliance.
Brass Shut-Off Valve
This Brass Shut-Off Valve is designed to make your life easier. Fitted near the end of a hose it will allow you to stop the flow of water by turning the on/off tap without having to return to the tap.
Shop Safe with Two Wests And Elliott
Two Wests and Elliott Sales Department
Two Wests & Elliott FREE Catalogues
Max Min Digital Thermometer
Free Competition to win £50 gift voucher
© 2015 Copyright Two Wests & Elliott. All rights reserved.