YOUR Basket
Basket
Items: 0
Goods Total: £0.00
Delivery: £0.00
NeedHelp 
Contact us on:
01246 451077 enquiries@twowests.co.uk
Search

Elite Greenhouse Spares

If You have, or are looking to purchase an Elite Greenhouse this category will list all the available Elite greenhouse spares and accessories suitable for this well known, industry leading brand.
With these Elite Greenhouse Spares you will be able to repair and maintain your Elite Greenhouse should it have been damaged in any way or need a replacement part, all the fixings such as 'W' clips, 'Z' clips, band clips, cropped and square headed bolts and nuts, are available to you so that you can keep your Elite Greenhouse in tip top condition.
With these Elite Greenhouse Accessories you will be able Improve its functionality with the addition of extra roof vents or louvers and Automatic openers, collect rainwater with their bespoke rainwater kits or add bar capping to enhance the appearance.

Greenhouse Glazing Strip
Suitable for use in most makes of aluminium greenhouses this high density foam Glazing Strip is used to form a cushion between the greenhouse framework and glass.


Bar Capping for Elite Compact Greenhouse
Bar Capping can be used when you are glazing an Elite Greenhouse with either toughened glass or polycarbonate. Used in addition to the wire clips, it provides a stronger hold for the glazing making it ideal for greenhouses in more exposed areas as well as greatly enhancing the appearance of the greenhouse by hiding all the glazing clips and giving a nice clean, continuous wipe clean edge.


Bar Capping for Elite Streamline Greenhouse
When you choose toughened glass or polycarbonate for the glazing for your Elite Streamline greenhouse we always recommend that you order Bar Capping. This not only holds the glazing in more securely, as it is in addition to the wire clips, it also gives the greenhouse a neater, more decorative finish.


Bar Capping for Elite Craftsman
If your greenhouse is going to be glazed with either toughened glass or polycarbonate then we recommend that you order Bar Capping. Designed to hold the glazing more securely to the greenhouse framework also giving a much neater finish. Bar capping is used in addition to the wire 'W' clips.


BAR CAPPING for Elite Craftsman High Eave
If your greenhouse is going to be glazed with either toughened glass or polycarbonate then we recommend that you order Bar Capping. Designed to hold the glazing more securely to the greenhouse framework whilst also giving a much neater finish. Bar capping can be fitted over the top of 'W' clips.


BAR CAPPING for Elite Belmont Greenhouse
If you’ve chosen either toughened glass or polycarbonate for the glazing of your Elite Belmont greenhouse, then we recommend that you also purchase this Bar Capping. It not only doubles the grip on the glazing, as you use it in addition to wire clips, it also results in a better water seal between the frame and glass.


BAR CAPPING for Elite Garden Supreme Greenhouse
When you’ve chosen to have your Garden Supreme Greenhouse with either toughened glass or polycarbonate glazing we recommend that you also purchase Bar Capping. This is used in addition to the wire 'W' clips, so doubling the strength at which the glazing is held within the frame. This makes bar capping very suitable if your greenhouse is to be in an exposed area, whilst also giving it a much neater appearance.


BAR CAPPING for Elite Classique Greenhouse
Bar Capping provides a stronger hold for toughened glass or polycarbonate and also adds a decorative finish to your Classique greenhouse.


BAR CAPPING for Elite Windsor Lean To Greenhouse
Elite supply a PVC Bar Capping to suit their Windsor Lean-to greenhouse. The bar capping is simply placed into position then secured using stainless steel screws into the aluminium glazing bar. The capping is used in addition to the wire clips, so holding glazing in place more securely , whilst also creating a much neater easily maintained finish.


BAR CAPPING for Elite 4'4" wide Kensington Lean To Greenhouse
Having chosen toughened glass or polycabonate as the glazing for your Elite Kensington Lean-To, the addition of this Elite Bar capping will put the finishing touch to the building. The bar capping gives the building a much neater finish and also increases the 'grip' on the glazing, as it is fitted of the glazing clips you are effectively doubling up on the glazing fixings.


BAR CAPPING for Elite Kensington 6'5" Wide Lean To Greenhouse
Having chosen toughened glass or polycabonate as the glazing for your Elite Kensington Lean-To, the addition of this Elite Bar capping will put the finishing touch to the building. The bar capping gives the building a much neater finish and also increases the 'grip' on the glazing, as it is fitted over the glazing clips you are effectively doubling up on the glazing fixings.


BAR CAPPING for Elite Kensington 8'4" wide Lean To Greenhouse
Having chosen toughened glass or polycabonate as the glazing for your Elite Kensington Lean-To, the addition of this Elite Bar capping will put the finishing touch to the building. The bar capping gives the building a much neater finish and also increases the 'grip' on the glazing, as it is fitted over the glazing clips you are effectively doubling up on the glazing fixings.


BASE for Elite Windsor Lean To Greenhouse
Easily fit your Elite Windsor Lean-To directly to this sturdy, aluminium, factory made Windsor Base. The aluminium base creates a solid, level perimeter (3 sides) for you to site your Elite Windsor lean-to on allowing you to cope with slighty uneven or soft sites.


BAR CAPPING for Elite Easygrow Lean To Greenhouse
Elite supply a PVC Bar Capping to suit their Easygrow Lean-to greenhouse. The bar capping is simply placed into position then secured using stainless steel screws into the aluminium glazing bar. This bar capping can be used in addition to wire clips, so holding glazing in place more securely.


BAR CAPPING for Elite Dwarf Wall Greenhouse
Bar Capping provides a stronger hold for the glazing in your greenhouse, and also adds a decorative finish to any greenhouse. The rubber fin also adds a better water seal between the frame and glass. Capping is used in addition to wire clips so in effect will double the grip on the glazing which is ideal in more exposed areas.


Base for Elite Classique Greenhouse
Elite offers a separate 5" (13cm) aluminium base for its Classique greenhouses up to 14’5" in length. The aluminium base is versatile in that it has the ability to go directly onto soil or grass and can be adapted for any solid foundation, such as concrete or slabs. Greenhouse above 14' 5" in length should be sited on properly prepared foundations (plans can be provided).


Elite Dropped Door
Please Note: This product can only be purchased at the same time as an Elite Greenhouse or Lean To Greenhouse, it CAN NOT be ordered alone.
When siting your greenhouse, if you choose to locate it on top of a purpose built dwarf brick wall you will end up with an awkward 'step over' into your greenhouse. For this reason Elite offer this Dropped Door Modification which alters the doorway to take into account the height of the wall.
You will be left with a minimal 3/4" (2cm) high aluminium threshold plate.


BASE for Elite Easygrow Lean To Greenhouse
Your Elite Easygrow Lean to Greenhouse will need some type of base, whether timber, brick or aluminium in order to allow its door to slide in the overhanging bottom track. Buy this Aluminium Base and you are guaranteed it will be an exact fit to your chosen your lean to, creating a secure base which won’t rust, rot or discolour.


Elite Extra Door
Please Note: This product can only be purchased at the same time as an Elite Greenhouse or Lean To Greenhouse, it CAN NOT be ordered alone.
Provides extra access into your chosen Elite greenhouse. A complete kit is supplied for you to fit an Extra door to the opposite end of your greenhouse or lean-to.
Or buy the door to add to your included single door to create a double door.

Please choose the door to match the one supplied as standard with your chosen greenhouse or lean-to.

NB. - Can only be ordered at the same time as the greenhouse or lean-to, as Elite have to make modifications to the main building in order for it to be accomodated.


Elite Bar Capping for Extra Door
Bar capping to fit your chosen Elite extra rear door - please ensure you choose the width kit to match the door you have selected.
NB. Only suitable if your greenhouse or lean-to is to glazed with toughened glass or polycarbonate.


Elite GHouse Partition Bar Capping
If you are ordering an Elite Greenhouse Partiition to put in your Elite Greenhouse which has bar capping fitted, then you should also add bar capping to the partition for the greenhouse. This will ensure that the whole greenhouse will have the same decorative finish. Bar Capping is available in a range of colours to match the colour of the greenhouse frame.


Partition Base for Elite Greenhouse
When fitting a partition within your Elite Garden Supreme or Classique Greenhouse you will need to provide a base for the partition to fit to. The base should be made in the same way as the base for your greenhouse, so if you’ve built a brick base, build a brick base for the partition. If you have ordered a factory made aluminium base for your greenhouse, then you should order an aluminium base for the partition.


Partition For Elite Greenhouse
Fit a partition within your Elite greenhouse and it enables you to create different environments, this is especially suitable if you want to keep one area of your greenhouse warmer, say for germinating seeds and propagating cuttings, and the other area of the greenhouse could be kept just frost free. So, by fitting a partition within your greenhouse, it makes it cheaper for you to keep one area warm enough for propagation than if you had to heat the whole greenhouse.


ROOF VENT for Elite Greenhouse
Please Note: This product can only be purchased at the same time as an Elite Greenhouse, it CAN NOT be ordered alone.
Roof vents in the top of your greenhouse allow you to reduce the temperature in your greenhouse during the summer months. Ventilation in your greenhouse is very important, you can’t have too much ventilation, but you can have too little.
So when purchasing a greenhouse we advise you to try to have at least two roof vents in a greenhouse 6’ x 6’, and even more in larger greenhouses.


BASE for Elite Garden Supreme Greenhouse
The Elite Garden Supreme is a greenhouse for the professional gardener. With standard features such as its heavy duty bracing at the eaves, louvre windows included and a double door you’d expect this substantial greenhouse to require a superior base. Elite manufacture and supply an aluminium base which will fit exactly to the Garden Supreme ( up to a maximum of the 14' 5" Long model) and let you easily site your greenhouse on soil, grass or a hard foundation. You can construct the base at the same time as you build your greenhouse to create a superior building, strong, rust and rot proof.


BASE for Elite Kensington Lean To Greenhouse
A greenhouse base helps you to secure your greenhouse to either soil, grass or a solid foundation. For the range of Elite Kensington Lean To greenhouses you can either build your own brick base or purchase an Elite Aluminium Base, which will match your lean to exactly. You secure the aluminium base to the ground, whether to a prepared concrete foundation, paving slabs or directly on to compacted earth. The Kensington Lean To is then fitted onto the aluminium base, resulting in a lean to greenhouse which will be securely held in place.


LOUVRE KIT for Elite Lean To Greenhouse
Please Note: This product can only be purchased at the same time as an Elite Lean To Greenhouse, it CAN NOT be ordered alone.
A louvre window increases air flow in your greenhouse, helping to keep your greenhouse cooler on warm days and allowing some air flow in the cooler months to help prevent damping off and disease.


Partition Bar Capping for Elite Lean To Greenhouse
Bar Capping provides a stronger hold on the glazing within your lean-to, it’s used in addition to the wire clips so in effect your are doubling the hold on the glazing, especially useful if your glean-to is in an exposed area. If you have ordered Bar Capping for your lean-to and are adding a partition, we would recommend you also purchase bar capping for the partition.


PARTITION BASE For Elite Kensington Lean To Greenhouse
This factory made, aluminium base has been manufactured to provide a secure footing when you are fixing a partition within your lean-to greenhouse. It matches exactly the aluminium base for the lean-to, so is the easiest way to attach the partition to a base. If, however, you have built a brick base for your lean-to, then you should build a brick base for the partition.


PARTITION for Elite Kensington Lean To Greenhouse
Why fit a partition in your greenhouse?
The main reason for fitting a partition is to separate the building into smaller sections, which you can then treat differently. For example you could keep one area as a warm house, possibly as a place for propagation, whereas the other area could be a cold house for hardening off older plants before they go into the garden. Keeping the area you wish to heat to higher temperatures as small as possible will help greatly in keeping running costs down.


Elite Lean To Roof Vent
Please Note: This product can only be purchased at the same time as an Elite Lean To Greenhouse, it CAN NOT be ordered alone.
Roof Vents in your greenhouse allow you to provide ventilation and air circulation in your greenhouse, especially important during the summer months when your greenhouse can get very warm. So it’s important when you purchase your greenhouse that you have sufficient roof vents for the size of greenhouse, you can have too few roof vents but it’s not possible to have too many !
It’s also much more difficult to fit roof vents after you’ve built your greenhouse than it would be to fit them when you’re building your greenhouse.


RAINWATER COLLECTION KIT for Elite Greenhouses
Elite greenhouses are supplied complete with an integral, semi-circular gutter so if you want to collect the rainwater into a water butt this range of rainwater kits will make it quick and easy for you.
The kit is easy to fit - all the fittings are supplied to enable you to simply attach it to the greenhouse gutter and divert the water to your water butt(s). Choose from a kit to suit a lean-to greenhouse, or a freestanding greenhouse, NB. - with the free standing greenhouses choose a kit to either divert water into one water butt or into two.(see the more details tab)


Elite Crestings and Finials
Whilst not a necessity Elite Greenhouse ridge Crestings and Finials can create an individual and stylish decorative finish to your greenhouse.
These quality Elite Ridge Crestings and Finials are made from rust free aluminium and can be powder coated to match your greenhouse. The crestings and finials simply slide onto the ridge of any Elite freestanding greenhouse.
It has also been commented on by many customers, that ridge crestings and finials whilst adding that decorative finish, also have the practical advantage of deterring cats and birds gaining access to the greenhouse roof.

W Greenhouse Glazing Clips
'W' shaped stainless steel wire clips used to securely hold glass in aluminium greenhouse frameworks. These greenhouse glazing clips are used in most makes of aluminium greenhouse, used to hold the glass back into the frame. They will cope with a variety of glass thickness's and can also be used to hold polycarbonate glazing panels into aluminium frames.


Part Formed Z Greenhouse Glazing Clips
When glazing or re-glazing a glass glazed greenhouses use these sturdy, rust proof aluminium part formed Z Clips where two panes of glass overlap. Being only a part formed greenhouse glazing clip allows you to set your glass overlap, this enables you to vary the overlap which gives you the ability to fill a greenhouse frame with glazing. Can be used in aluminium or wooden framed greenhouses.


Pre Formed Z Greenhouse Glazing Clips
Robust, aluminium Pre Formed Z Clips used when glazing or re-glazing a glass glazed greenhouses. These greenhouse glazing clips are used to support overlapping panes of glass within the aluminium or wooden greenhouse frame.


Band Greenhouse Glazing Clips
Band Clips are stainless steel, sprung greenhouse glazing clips designed to securely hold glass or other types of greenhouse glazing in most aluminium greenhouse frameworks.


BAR CAPPING for Elite Thyme 6' wide Greenhouse
This stylish Bar Capping is a great addition to your Elite Thyme Greenhouse. It not only doubles the grip on the glazing, as you use it in addition to wire clips, it also results in a better water seal between the frame and glass and also gives the greenhouse a fantastic finished look.


BAR CAPPING for Elite Thyme 8' wide Greenhouse
This stylish Bar Capping is a great addition to your Elite Thyme Greenhouse. It not only doubles the grip on the glazing, as you use it in addition to wire clips, it also results in a better water seal between the frame and glass and also gives the greenhouse a fantastic finished look.


Shop Safe with Two Wests And Elliott
Two Wests and Elliott Sales Department
Two Wests & Elliott FREE Catalogues
Max Min Digital Thermometer
NewsLetterTitle
Free Competition to win £50 gift voucher
© 2015 Copyright Two Wests & Elliott. All rights reserved.