YOUR Basket
Basket
Items: 0
Goods Total: £0.00
Delivery: £0.00
NeedHelp 
Contact us on:
01246 451077 enquiries@twowests.co.uk
Search

Fruit & Vegetable Cage Joints

These fruit and vegetable cage joints will be invaluable if you are planning to build your own fruit and vegetable cage, garden frame or plant support system.
This range of joints used for connecting our 19mm (3/4") and 25mm (1") aluminium tubes, as used in our standard and heavy duty fruit and vegetable cages, are available to you as individual components, in order that you may either - build your own, extend an existing or make repairs to, fruit and vegetable cages or other garden or plant support frame.
The 19mm(3/4") strong, UV stabilised black nylon joints, as used as our own standard Fruit and Vegetable Cage joints, are used in conjunction with our 19mm (3/4") aluminium tubing - simply locate (internal fitting) in the end of a piece of aluminium tubing and knock home using a rubber or wooden mallet.
The 25mm (1") robust, galvanised steel joints, as used in our own heavy duty fruit and vegetable cages, are used in conjunction with our 25mm (1") aluminium tubing - simply insert the tube into the joint and secure by tightening the steel grub screw.
With such a wide variety of tube joints available, almost any bespoke design of build your own fruit cage, garden frame or plant system can be constructed.

19mm Tube 2 Way 90* Flat Joint
Create strong plant supports to your own design by combining this robust 2 Way 90º Joint with our quality 19mm aluminium tubing and other joints.


19mm Tube 3 Way 90* Joint
Use this robust 3 Way 90º Joint to form a sturdy corner in your own DIY fruit cage, cloche, cold frame etc. by combining with our high quality 19mm aluminium tubing.


19mm Tube Flat 3 Way Joint
Use this robust flat 3 Way 90º Joint to form a sturdy junctions in your own DIY fruit cage, cloche, cold frame etc. by combining with our high quality 19mm aluminium tubing.


19mm Tube 4 Way 90* Joint
Create large DIY fruit cages, vegetable cages etc by combining this robust 4 Way 90º Joint with our strong 19mm aluminium tubing.


19mm Tube 5 Way 90* Joint
Use this strong 5 Way 90º Joint with our sturdy 19mm aluminium tubing to design and build large DIY fruit cages, vegetable cages etc.


19mm Tube 6 Way 90* Joint
For complex DIY fruit cages, plant supports, cold frames etc this sturdy 6 Way 90º Joint will hold six lengths of our quality 19mm aluminium tube in place.


19mm Tube Ground Spike
A strong, black UV stabilised nylon Ground Spike, as used in our Fruit Cages.


19mm Tube Hinge Joint
Use this specially designed Hinge joint when creating an entrance into a Fruit Cage or a lifting lid on low level structures.


19mm Tube 90* Tube Clip
Made to fit our ¾" (19mm) diameter aluminium tubing.
This 90 degree tube clip is ideal to create a quick, clip on, 90* junction in a tubular structure, I.E. an extra vertical support to a horzontal tube.


19mm Tube End Cap
A strong, black UV stabilised nylon End Cap, as used in our Fruit Cages and DIY frameworks.


20mm Tube Wall Clip
A strong, black UV stabilised Tube Wall nylon Clip, as used with our ¾" (19mm) diameter aluminium tubing.


19mm Tube Material Fixing Clip
Securely hold polythene, fleece, mesh or net to our aluminium tube with these Material Fixing Clips.
Holding material securely in place they are also easy to remove and reuse if you need to.


Heavy Duty 5 Way Joint
Use this strong, galvanised Heavy Duty 5 Way Joint when connecting lengths of our heavy duty aluminium tubing.
Secure assembly is achieved with allen key driven grub screws, locking the tubing in place.


Heavy Duty Single Socket Tee Joint
Use this strong, Heavy Duty Socket Joint to form a "Tee" formation using our heavy duty aluminium tubing.
Secure assembly is achieved with allen key driven grub screws, locking the tubing in place.


Tube Heavy Duty 2 Way 45 degree Joint
Use this strong, Heavy Duty Hinge 2 Way 45* when connecting lengths of our heavy duty aluminium tubing.
Secure assembly is achieved with allen key driven grub screws, locking the tubing in place.


Heavy Duty Tube Hinge Eye Joint
Use this Heavy Duty Hinge Eye Joint with our heavy duty aluminium tubing and Pin Joint to design and build hinge assemblies for large DIY fruit cages, vegetable cages etc.
This part is one half of the door hinge assembly.


Heavy Duty Hinge Pin Joint
Use this Heavy Duty Hinge Pin Joint with our sturdy aluminium tubing to design and build large DIY fruit cages, vegetable cages etc.
This part is one half of the door hinge assembly.


Spare Set Screws for Heavy Duty Joint
For use with our Galvanised Steel Joints this Spare Set Of Screws come in handy if you are rebuilding one of our heavy duty fruit cages.
Allen Key for Heavy Duty Joint
Use this Allen Key to secure all your fruit cage joints in place when you are building your Heavy Duty fruit cage.


Double Tube Clip
Use this specially designed Double tube clip as a closing clip when creating a door into your Fruit Cage or tubular structure.
Only for use with our 19mm (outside diameter) aluminium tube.


Heavy Duty 3 Way Joint
Use this strong, galvanised Heavy Duty 3 Way Joint when connecting lengths of our heavy duty aluminium tubing.
Secure assembly is achieved with allen key driven grub screws, locking the tubing in place.


Heavy Duty 4 Way Joint
Use this strong, galvanised Heavy Duty 4 Way Joint when connecting lengths of our heavy duty aluminium tubing.
Secure assembly is achieved with allen key driven grub screws, locking the tubing in place.


Shop Safe with Two Wests And Elliott
Two Wests and Elliott Sales Department
Two Wests & Elliott FREE Catalogues
Max Min Digital Thermometer
NewsLetterTitle
Free Competition to win £50 gift voucher
© 2015 Copyright Two Wests & Elliott. All rights reserved.