All of the Gardena ‘click-fit’ connectors are 100% compatible with other ‘click-fit’ systems on the market, so can be easily integrated into an existing system when updating or expanding your watering systems.

If you’ve not set up a watering system before, follow our simple advice below to make the Perfect Connection between your outside tap and what’s to be watered.

Step One – Check The Size Of The Tap

The simplest way to check your tap size is to check its external diameter against a coin
– 1p = ½” tap, 2p = ¾” tap.

Step Two – Select A Threaded Tap Connector

We stock a range of Gardena ’ s top quality plastic fittings which will enable you to connect a hosepipe or other watering appliance to threaded taps.  
These connectors take a Snap On Connector.

Step Three – Choose A Hosepipe

You ’ ll find a selection of hosepipes to choose from – all have been selected as they are robust, kink free hoses which will provide years of use.

Step Four – Join and Branch Hosepipe

You can divert your hosepipe in different directions using these Gardena Hose Couplings. They join to your hosepipe using Snap-On Hose Connectors.

Step Five – Snap-On Connectors

These robust plastic connectors from Gardena fit onto the end of hosepipe and between hosepipe and Tap Connectors, Hose Couplings or Watering Appliances. These create a connection which is totally watertight and that can easily be removed with a simple
‘ pull action ’ .

Step Six – Select A Watering Appliance

You can now fit any watering devise to the end of your hosepipe. We stock a range of Gardena Spray Guns and Nozzles for manual watering and Sprinklers for watering large areas.